# text: "An error occurred while updating your TCP/IP Preferences. They are probably damaged. You will have to rebuild them using the TCP/IP Control Panel. See the NETCOMplete help pages for the correct settings. (Sorry!)"
DITL_10005.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=116 x2=220 y2=136
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=10 x2=350 y2=108
# text: "We were unable to update your TCP/IP Preferences, so your machine is not configured to access Netcom. You will have to do this by hand. Please see the Netcomplete Help documentation."
DITL_10004.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=132 x2=220 y2=152
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=10 x2=350 y2=124
# text: "We don’t know how to configure your machine to access NETCOM, because you are using a version of Open Transport that is too new for us. Apologies; you will have to configure TCP/IP by hand. See the NETCOMplete help pages for instructions."
DITL_10003.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=116 x2=220 y2=136
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=10 x2=350 y2=108
# text: "You have many renamed, old versions of MacTCP Prep in your Preferences Folder (inside your System Folder). Please delete some of them before continuing. MacTCP Prep was not installed."
DITL_10002.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=75 x2=220 y2=95
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=69 y1=10 x2=346 y2=60
# text: "A File System Error occurred while trying to rename MacTCP Prep. The new file was not installed."
DITL_10001.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=146 x2=350 y2=166
# text: "Rename"
# item 1: BUTTON (0x04) enabled
# bounds: x1=160 y1=146 x2=240 y2=166
# text: "Replace"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=10 x2=370 y2=138
# text: "You already have a ‘MacTCP Prep’ file. This file contains settings for communicating with your Internet Service Provider.\n\nDo you want to save your current file by naming it ‘MacTCP Prep.old,’ or simply replace it with the new one?"
DITL_8000_SITIM PPC needed.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=367 y1=60 x2=425 y2=80
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=84 y1=6 x2=434 y2=44
# text: "You need a Macintosh equipped with a PowerPC processor to run this application."
DITL_7000.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=218 y1=132 x2=288 y2=150
# text: "Install"
# item 1: BUTTON (0x04) enabled
# bounds: x1=218 y1=158 x2=288 y2=176
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=136 x2=197 y2=152
# text: "Save as:"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=200 y1=29 x2=302 y2=49
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=218 y1=56 x2=288 y2=74
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=218 y1=82 x2=288 y2=100
# text: "Drive"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=17 y1=157 x2=194 y2=173
# text: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=14 y1=29 x2=197 y2=127
# data: ""
DITL_2052_New Folder.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=130 y1=61 x2=190 y2=81
# text: "Create"
# item 1: BUTTON (0x04) enabled
# bounds: x1=10 y1=61 x2=70 y2=81
# text: "Cancel"
# item 2: EDIT_TEXT (0x90) disabled
# bounds: x1=12 y1=33 x2=189 y2=49
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=8 x2=178 y2=28
# text: "Name of new folder:"
DITL_1601.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=281 y1=74 x2=339 y2=94
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=63 y1=3 x2=343 y2=64
# text: "This software requires ^0, which this system does not have. Installation cannot proceed."
DITL_1600.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=281 y1=74 x2=339 y2=94
# text: "No"
# item 1: BUTTON (0x04) enabled
# bounds: x1=214 y1=74 x2=272 y2=94
# text: "Yes"
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=3 x2=343 y2=64
# text: "This software requires ^0, which this system does not have. Install anyway?"
DITL_1500.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=415 y1=274 x2=484 y2=293
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=89 y1=274 x2=159 y2=293
# text: "Print…"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=4 y1=5 x2=475 y2=259
# data: ""
# item 3: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=475 y1=4 x2=491 y2=260
# CNTL resource ID: 1500
# item 4: BUTTON (0x04) enabled
# bounds: x1=335 y1=274 x2=404 y2=293
# text: "Cancel"
# item 5: BUTTON (0x04) enabled
# bounds: x1=10 y1=274 x2=80 y2=293
# text: "Save…"
DITL_1199.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=135 y1=54 x2=193 y2=74
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=69 y1=2 x2=319 y2=47
# text: "^0 appears to be damaged."
DITL_1099.txt
# 3 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=283 y2=26
# text: "Please insert disk ^0 with:"
# item 1: ICON (0xA0) disabled
# bounds: x1=11 y1=11 x2=43 y2=43
# ICON resource ID: 1099
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=29 x2=280 y2=45
# text: "^1"
DITL_1050.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=119 y1=113 x2=187 y2=133
# text: "Continue"
# item 1: PICTURE (0xC0) disabled
# bounds: x1=4 y1=4 x2=304 y2=104
# PICT resource ID: 1050
DITL_1026.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=301 y1=70 x2=359 y2=90
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=231 y1=70 x2=289 y2=90
# text: "No"
# item 2: TEXT (0x88) disabled
# bounds: x1=65 y1=2 x2=360 y2=57
# text: "Your Macintosh needs to be restarted after installation is complete. Do you wish to continue?"
DITL_1025.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=99 y1=105 x2=159 y2=125
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=61 y1=0 x2=243 y2=96
# text: "There is not enough room on “^0” to perform the installation. An additional ^1 bytes are needed."
DITL_1000.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=119 y1=113 x2=187 y2=133
# text: "Continue"
# item 1: PICTURE (0xC0) disabled
# bounds: x1=4 y1=4 x2=304 y2=104
# PICT resource ID: 1000
DITL_800.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=304 y1=78 x2=362 y2=98
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=55 y1=4 x2=365 y2=69
# text: "One or more desk accessories could not be installed because there are too many desk accessories already installed in your System file. "
DITL_265.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=122 y1=107 x2=192 y2=127
# text: "Replace"
# item 1: BUTTON (0x04) enabled
# bounds: x1=12 y1=107 x2=82 y2=127
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=8 x2=190 y2=41
# text: "Replace existing “^0” ?"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=46 x2=193 y2=95
# text: "Warning: You are replacing a folder. Its contents will be erased."
# item 4: HELP_BALLOON (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# text: "\x01\x01\t"
DITL_181.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=122 y1=104 x2=182 y2=124
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=0 x2=293 y2=94
# text: "Some items were skipped because they are not supported by this self-extractor."
DITL_139.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=73 x2=338 y2=93
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=59 y1=5 x2=344 y2=62
# text: "Installation was successful. "
# item 2: ICON (0xA0) disabled
# bounds: x1=12 y1=5 x2=44 y2=37
# ICON resource ID: 1
DITL_138.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=273 y1=73 x2=341 y2=93
# text: "Reinstall"
# item 1: BUTTON (0x04) enabled
# bounds: x1=195 y1=73 x2=263 y2=93
# text: "Quit"
# item 2: TEXT (0x88) disabled
# bounds: x1=68 y1=4 x2=339 y2=54
# text: "Installation did not complete successfully. Do you wish to attempt to reinstall the software or to quit?"
DITL_137.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=73 x2=338 y2=93
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=59 y1=5 x2=344 y2=62
# text: "Installation was successful. In order to take advantage of the new software, you will need to restart your Macintosh."
# item 2: ICON (0xA0) disabled
# bounds: x1=14 y1=8 x2=46 y2=40
# ICON resource ID: 1
DITL_136.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=73 x2=338 y2=93
# text: "Restart"
# item 1: TEXT (0x88) disabled
# bounds: x1=59 y1=5 x2=344 y2=62
# text: "Installation was successful. In order to take advantage of the new software, your Macintosh needs to be restarted."
# item 2: ICON (0xA0) disabled
# bounds: x1=11 y1=8 x2=43 y2=40
# ICON resource ID: 1
DITL_135.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=73 x2=338 y2=93
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=192 y1=73 x2=260 y2=93
# text: "Continue"
# item 2: TEXT (0x88) disabled
# bounds: x1=59 y1=5 x2=344 y2=62
# text: "Installation was successful. Choose Quit if you are finished or Continue to perform further installations."
# item 3: ICON (0xA0) disabled
# bounds: x1=13 y1=8 x2=45 y2=40
# ICON resource ID: 1
DITL_134.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=115 y1=83 x2=175 y2=103
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=73 y1=4 x2=302 y2=69
# text: "An item was compressed with a method that this version of the self-extractor does not handle."
DITL_133.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=102 y1=109 x2=162 y2=129
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=72 y1=4 x2=259 y2=103
# text: "Sorry, but a disk related error (^0) has occurred."
DITL_130.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=112 y1=93 x2=172 y2=113
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=74 y1=0 x2=275 y2=85
# text: "The file “^0” may be damaged. Please use it with caution."
DITL_128.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=112 y1=93 x2=172 y2=113
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=74 y1=0 x2=275 y2=85
# text: "Sorry. Installation can only be performed on HFS volumes."
